编组 6 编组 3备份 形状

OB2365ETAP

GENERAL DESCRIPTION

OB2365EX combines a dedicated current mode PWM controller with a high voltage power MOSFET. It is optimized for high performance, low standby power, and cost effective off-line flyback converter applications.

At normal load condition, it operates in QR mode in high line input voltage. To minimize switching loss, the maximum switching frequency in QR mode is internally limited to 77 KHz. When the loading goes low, it operates in PFM mode with valley switching for high power conversion efficiency. When the load is very small, the IC operates in ‘Extended Burst Mode’ to minimize the standby power loss. Additionally, in the low line input voltage, the IC operates in fixed frequency (65KHz) CCM mode at the heavy loading. As a result, high conversion efficiency can be achieved in the whole loading range.

VDD low startup current and low operating current contribute to a reliable power on startup and low standby design with OB2365EX.

OB2365EX offers comprehensive protection coverage with auto-recovery including Cycle-by-Cycle current limiting (OCP), over load protection (OLP), VCC under voltage lockout (UVLO), brownout and output over voltage protection (OVP).  Excellent EMI performance is achieved with On-Bright proprietary frequency shuffling technique.

The tone energy at below 23KHz is minimized in the design and audio noise is eliminated during operation.

OB2365EX is offered in DIP8 package.


APPLICATIONS

Offline AC/DC flyback converter for

   General power supply

   Power Adapter


FEATURES

   Power on soft start reducing MOSFET Vds stress

   Multi-Mode Operation

77KHz maximum clamping frequency in QR mode @ Full Load in high line voltage

65KHz minimum clamping frequency in CCM mode @ Heavy Load in low line voltage

Valley switching operation @ Green mode

  Burst Mode @ Light Load & No Load

   Frequency shuffling for EMI

   Extended burst mode control for improved efficiency and low standby power design

   Audio noise free operation

   Comprehensive protection coverage

o    VCC Under Voltage Lockout with hysteresis (UVLO)    

o    VCC Over Voltage Protection (VCC OVP)  

o    Cycle-by-cycle over current threshold setting for constant output power limiting over universal input voltage range

o    Over Load Protection (OLP) with auto-recovery

o    Brownout protection with auto-recovery

o    Output Over Voltage Protection(Output OVP) with auto-recovery, and  the OVP triggered voltage can be adjusted by the resistors connected between auxiliary winding and ground

o    Output diode short protection with auto-recovery  


TYPICAL APPLICATION


 



0.285866s