编组 6 编组 3备份 形状

OB2015

GENERAL DESCRIPTION

OB2015 is a high performance and tightly integrated secondary side synchronous rectifier for switch mode power supply system. It combines a much lower voltage drop N-channel MOSFET to emulate the traditional diode rectifier at the secondary side of Flyback converter, which can reduce heat dissipation, increases output current capability and efficiency and simplify thermal design. It can support wide range of system output voltage 5V~15V.

It is suitable for multiple mode applications including discontinuous conduction mode (DCM), quasi-resonant mode (QR) and continuous conduction mode (CCM). Especially for CCM, to guarantee system reliability, super fast SR turn-off comparator and soft gate driver are used to reduce the whole propagation delay in SR turn-off control path.

To avoid the ring impact induced by parasitic elements, the innovative property ring detection is implemented on chip to prevent SR turn on falsely so that a reliable and noise free operation of the SR system is insured.

In addition, the Vds voltage is regulated to about -40mV through on-chip soft gate driver control regardless of Rdson of SR MOSFET to achieve more reliable operation

OB2015 is offered in SOP8 package.


FEATURES

   Secondary-side synchronous rectifier for 5V~15V output system

   Power supply from system output voltage and no need for additional capacitor

   Suitable for DCM, QR and CCM operation

   Internal Power MOSFET

   Accurate secondary side MOSFET Vds sensing

   Innovative property ring detection to avoid the ring impact induced by parasitic elements

   Soft gate driver

   UVLO protection


APPLICATIONS

   AC/DC 5V~15V chargers/adaptors

   Low voltage rectification circuits  


TYPICAL APPLICATION


0.269268s